Show Policy-Map Interface - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Committed Burst Size (KB)—This field displays the committed burst size, used in simple policing.
Conform Action—The current setting for the action taken on a packet considered to conform to the
policing parameters. This is not displayed if policing is not in use for the class under this policy.
Conform DSCP Value—This field shows the DSCP mark value if the conform action is markdscp.
Conform IP Precedence Value—This field shows the IP Precedence mark value if the conform action is
markprec.
Exceed Action—The current setting for the action taken on a packet considered to exceed to the
policing parameters. This is not displayed if policing not in use for the class under this policy.
Exceed DSCP Value—This field shows the DSCP mark value if this action is markdscp.
Exceed IP Precedence Value—This field shows the IP Precedence mark value if this action is markprec.
Non-Conform Action—The current setting for the action taken on a packet considered to not conform to
the policing parameters. This is not displayed if policing not in use for the class under this policy.
Non-Conform DSCP Value—This field displays the DSCP mark value if this action is markdscp.
Non-Conform IP Precedence Value—This field displays the IP Precedence mark value if this action is
markprec.
Bandwidth—This field displays the minimum amount of bandwidth reserved in either percent or
kilobits-per-second.
Expedite Burst Size (KBytes)—This field displays the maximum guaranteed amount of bandwidth
reserved in either percent or kilobits-per-second format.
Shaping Average—This field is displayed if average shaping is in use. Indicates whether average or
peak rate shaping is in use, along with the parameters used to form the traffic shaping criteria, such as
CIR and PIR. This is not displayed if shaping is not configured for the class under this policy.
Shape Committed Rate (Kbps)—This field is displayed if average or peak rate shaping is in use. It
displays the shaping committed rate in kilobits-per-second.
Shape Peak Rate (Kbps)—This field is displayed if peak rate shaping is in use. It displays the shaping
peak rate in kilobits-per-second.
If the policy name is not specified, this command displays a list of all defined DiffServ
policies. The following fields are displayed:
Policy Name—The name of this policy. (Note that the order in which the policies are displayed is not
necessarily the same order in which they were created.)
Policy Type—The policy type, namely whether it is an inbound or outbound policy definition.
Class Members—List of all class names associated with this policy.

show policy-map interface

This command displays policy-oriented statistics information for the specified interface and direction.
Note:
This command is only allowed while the DiffServ administrative mode is enabled.
show policy-map interface unit/slot/port in
Syntax
Quality of Service (QoS) Commands | 363