Show Ip Ospf Range; Show Ip Ospf Neighbor Brief - Dell Force10 S2410-01-10GE-24P Command Reference Manual

show ip ospf neighbor brief

Syntax
Mode
Report Fields

show ip ospf range

Syntax
Mode
Report Fields
| OSPF Commands
446
Options—An integer value that indicates the optional OSPF capabilities supported by the neighbor. The
neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables received Hello
Packets to be rejected (i.e., neighbor relationships will not even start to form) if there is a mismatch in
certain crucial OSPF capabilities.
Router Priority—The OSPF priority for the specified interface. The priority of an interface is a priority
integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated
router on this network.
Dead Timer Due—The amount of time, in seconds, to wait before the router assumes the neighbor is
unreachable
State—The state of the neighboring routers
Events—
The number of times this neighbor relationship has changed state, or an error has
occurred
Retransmission Queue Length—An integer representing the current length of the retransmission queue
of the specified neighbor router Id of the specified interface
This command displays the OSPF neighbor table list. When a particular neighbor ID is specified,
detailed information about a neighbor is given. The information below will only be displayed if OSPF
is enabled.
nieAuaduendtuoEa:iresursaEt
Privileged Exec and User Exec
Router ID—A 4 digit dotted decimal number representing the neighbor interface.
IP Address—An IP address representing the neighbor interface.
Neighbor Interface Index—Is a
This command displays information about the area ranges for the specified
show ip ospf range areaid
The identifies the OSPF area whose ranges are being displayed.
areaid
Privileged Exec and User Exec
Area ID—The area ID of the requested OSPF area
IP Address—An IP Address which represents this area range
Subnet Mask—A valid subnet mask for this area range
Lsdb Type—The type of link advertisement associated with this area range
{unit/slot/port | all}
identifying the neighbor interface index.
unit/slot/port
areaid .