Enable Passwd - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Example
Related
Commands

enable passwd

Syntax
Parameters
Mode
Command
History
logout
Syntax
Mode
Related
Commands
| System Configuration Commands
110
Figure 6-36. Using the copy command to Download the CLI Banner
copy tftp://192.168.77.52/banner.txt nvram:clibanner
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.77.52
TFTP Path...................................... ./
TFTP Filename.................................. banner.txt
Data Type...................................... Cli Banner
Are you sure you want to start? (y/n) y
CLI Banner file transfer operation completed successfully!
(Force10 S50) #exit
Force10 S50) >logout
FORCE10's Login Banner - Unauthorized access is punishable by law.
User:
copy (clibanner)
write
This command changes the Privileged Exec password (commonly called the "enable" password),
which is not set when SFTOS boots for the first time. First type the command, then press Enter.
enable passwd
password
password Enter a text string, up to 32 characters long, as the clear text password.
Global Config
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
Close the current Telnet connection or reset the current serial connection.
Note:
Save configuration changes before logging out.
logout
Privileged Exec
quit lose the current Telnet connection, or reset the current serial connection
C
Downloads the CLI banner text file to the switch.
Saves the running configuration to NVRAM, duplicating the functionality of
copy system:running-config nvram:startup-config
.