Ospf Commands - Dell Force10 S2410-01-10GE-24P Command Reference Manual

OSPF Commands

This chapter provides a detailed explanation of the Open Shortest Path First (OSPF) commands. The
commands are divided by functionality into the following groups:
•
•
This chapter provides detail on the following commands:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Show commands are used to display switch settings, statistics and other information.
Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
1583compatibility on page 424
area authentication on page 425
area default-cost on page 425
area nssa on page 425
area nssa default-info-originate on page 425
area nssa no-redistribute (OSPF) on page 425
area nssa no-summary (OSPF) on page 426
area nssa translator-role (OSPF) on page 426
area nssa translator-stab-intv on page 426
area range on page 426
area stub on page 427
area stub summarylsa on page 427
area virtual-link on page 427
area virtual-link authentication on page 427
area virtual-link dead-interval on page 428
area virtual-link hello-interval on page 428
area virtual-link retransmit-interval on page 429
area virtual-link transmit-delay on page 429
default-information originate (OSPF) on page 430
default-metric (OSPF) on page 430
distance ospf on page 430
distribute-list out on page 430
enable (OSPF) on page 431
exit-overflow-interval on page 431
external-lsdb-limit on page 431
ip ospf on page 432
show ip ospf abr on page 440
ip ospf areaid on page 432
ip ospf authentication on page 433
23
OSPF Commands | 423