Spanning-Tree Msti Vlan - Dell Force10 S2410-01-10GE-24P Command Reference Manual

The instance mstid is a number in the range 0-63 that corresponds to the desired existing multiple
spanning tree instance.
0–61440
If 0 (defined as the default CIST ID) is passed as the mstid , this command sets the bridge priority
parameter to a new value for the common and internal spanning tree. The bridge priority value is a
number within a range of 0 to 61440. The twelve least significant bits will be masked, in accordance
with the 802.1s specification. This causes the priority to be rounded down to the next lower valid
priority.
The no version of this command sets the bridge priority for a specific multiple spanning tree instance
to the default value, in other words, 32768.
Default 32768
Mode
Global Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as
(conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related
interface
Commands
interface range

spanning-tree msti vlan

This command adds an association between a multiple spanning tree instance and a VLAN. The VLAN
will no longer be associated with the common and internal spanning tree.
[no] spanning-tree msti vlan msti vlanid
Syntax
The mstid is a number that corresponds to the desired existing multiple spanning tree instance. The
vlanid corresponds to an existing VLAN ID.
The
instance and a VLAN. The VLAN will again be associated with the common and internal
spanning tree. The instance
spanning tree instance. The
Mode Global Config
Command
Version 2.5.1
History
is the priority value, representing a range of 0 to 61440 in increments of 4096.
Modified: Revised syntax from
Added Interface Range mode.
Identifies an interface and enters the Interface Config mode.
Defines an interface range and accesses the Interface Range mode
no
version of this command removes an association between a multiple spanning tree
mstid
vlanid
Modified: Revised syntax from
spanning-tree mst priority mstid
is a number that corresponds to the desired existing multiple
corresponds to an existing VLAN ID.
spanning-tree mst vlan mstid vlanid
; changed the range.
Spanning Tree (STP) Commands | 325