Show Ip Rip - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Syntax for OSPF
as source
protocol
Syntax for other
source protocol
Default
Mode

show ip rip

Syntax
Mode
| RIP Commands
454
redistribute ospf [metric <0-15>] [match [internal] [external 1] [external 2] [nssa-external
1] [nssa-external-2]]
no redistribute {ospf | static | connected} [metric] [match [internal] [external 1] [external
2] [nssa-external 1] [nssa-external-2]]
redistribute {static | connected} [metric <0-15>]
metric—not-configured; match—internal
Router RIP Config
This command displays information relevant to the RIP router.
The no version of this command
show ip rip
Privileged Exec and User Exec
RIP Admin Mode—Select enable or disable from the pulldown menu. If you select enable RIP will be
enabled for the switch. The default is disable.
Split Horizon Mode—Select none, simple or poison reverse from the pulldown menu. Split horizon is a
technique for avoiding problems caused by including routes in updates sent to the router from which the
route was originally learned. The options are: None - no special processing for this case. Simple - a
route will not be included in updates sent to the router from which it was learned. Poisoned reverse - a
route will be included in updates sent to the router from which it was learned, but the metric will be set to
infinity. The default is simple
Auto Summary Mode—Select enable or disable from the pulldown menu. If you select enable groups of
adjacent routes will be summarized into single entries, in order to reduce the total number of entries The
default is enable.
Host Routes Accept Mode—Select enable or disable from the pulldown menu. If you select enable the
router will be accept host routes. The default is enable.
Global Route Changes—The number of route changes made to the IP Route Database by RIP. This
does not include the refresh of a route's age.
Global queries—The number of responses sent to RIP queries from other systems.Default Metric
Sets a default for the metric of redistributed routes.This field displays the default metric if one has
already been set or blank if not configured earlier. The valid values are (1 to 15)
Default Metric—Sets a default for the metric of redistributed routes.This field displays the default metric
if one has already been set or blank if not configured earlier. The valid values are (1 to 15)
Default Route Advertise—The default route.