Sntp Server; Sntp Unicast Client Poll-Timeout; Sntp Unicast Client Poll-Retry - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Usage
Default
Mode

sntp unicast client poll-timeout

Syntax
Default
Mode

sntp unicast client poll-retry

Syntax
Default
Mode

sntp server

Syntax
| Time Commands
246
You can also set the poll interval for an SNTP client with the sntp client port command.
6
Global Config
This command sets the number of seconds to wait for an SNTP response when the client is configured
in unicast mode.
sntp unicast client poll-timeout
The range is 1 to 30 seconds.
poll-timeout
no sntp unicast client poll-timeout
Use the
unicast clients to its default value.
5
seconds
Global Config
This command sets the number of times to retry a request to an SNTP server after the first time-out before
attempting to use the next configured server when configured in unicast mode.
sntp unicast client poll-retry
The poll-retry for SNTP unicast clients is an integer from 0 to 10 retries.
Use the no sntp unicast client poll-retry version of this command to reset the poll retry for SNTP
unicast clients to its default value.
1 retry
Global Config
This command configures an SNTP server connection (with a maximum of three).
sntp server
ipaddress [ priority
poll-timeout
command to reset the poll timeout for SNTP
poll-retry
[ version [ portid ]]]