System Logs - Dell Force10 S2410-01-10GE-24P Command Reference Manual

System Logs

This chapter provides a detailed explanation of the following syslog commands:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
See also general management "show" commands in the management chapter,
Commands on page 35
logging buffered
This command enables logging of the in-memory log to RAM and any other enabled destination,
including the console and any enabled syslog server.
ge::ao:urWt tEsE.u [ severitylevel]
Syntax
The severitylevel value is specified through one of the following keywords or the keyword's
representative integer, as shown here: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
Use no logging buffered to disable logging to RAM.
Default
disabled; critical
Mode Global Config
logging buffered on page 169
logging buffered wrap on page 170
logging cli-command on page 170
logging console on page 170
logging facility on page 171
logging history on page 172
logging host on page 172
logging persistent on page 173
logging port on page 173
logging syslog on page 173
show logging on page 174
show logging eventlog on page 175
show logging history on page 176
show logging hosts on page 177
show logging traplogs on page 177
and the RMON monitoring commands in
System Management
RMON Commands on page
System Logs | 169
9
261.