Show Ip Dvmrp Interface; Show Ip Dvmrp Neighbor - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Mode
Report Fields

show ip dvmrp interface

Syntax
Mode
Report Fields

show ip dvmrp neighbor

| IP Multicast Commands
468
Privileged Exec and User Exec
Admin Mode—This field indicates whether DVMRP is enabled or disabled. This is a configured value.
Version String—This field indicates the version of DVMRP being used.
Number of Routes—This field indicates the number of routes in the DVMRP routing table.
Reachable Routes—This field indicates the number of entries in the routing table with non-infinite
metrics.
The following fields are displayed for each interface.
Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
Interface Mode—This field indicates the mode of this interface. Possible values are Enabled and
Disabled.
State—This field indicates the current state of DVMRP on this interface. Possible values are Operational
or Non-Operational.
This command displays the interface information for DVMRP on the specified interface.
show ip dvmrp interface unit/slot/port
Privileged Exec and User Exec
Interface Mode—This field indicates whether DVMRP is enabled or disabled on the specified interface.
This is a configured value.
Metric—This field indicates the metric of this interface. This is a configured value.
Local Address—This is the IP Address of the interface.
This Field is displayed only when DVMRP is operational on the interface.
Generation ID—This is the Generation ID value for the interface. This is used by the neighboring routers
to detect that the DVMRP table should be resent.
The following fields are displayed only if DVMRP is enabled on this interface.
Received Bad Packets—This is the number of invalid packets received.
Received Bad Routes—This is the number of invalid routes received.
Sent Routes—This is the number of routes that have been sent on this interface.
This command displays the neighbor information for DVMRP.