Dell Force10 S2410-01-10GE-24P Command Reference Manual page 374

Usage
Information
Related
Commands
show buffer unit
Syntax
Mode
Example 1
| Quality of Service (QoS) Commands
374
The total number of packets cannot exceed 2047 per port.
buffer check
buffer dedicated (1G and
stacking ports)
buffer dedicated interface
(10G ports)
show buffer unit
show buffer allocation
interface
This command displays configured values for dedicated buffers, dynamic buffers, and packet limits for
each ASIC in the selected S50, S50V, or S25P, as well as the actual settings from the switch hardware.
Because configured values do not take effect until the stack is rebooted, the hardware values can be
different.
nieAurWt tEsuWoaC
unit
Privileged Exec
Figure 20-121. show buffer unit Command Output from an S50
(Force10 S50) #show buffer unit 1
Broadcom ASIC 5675 (BCM unit 0)
Total Physical Buffer...............................1152 kb
Interface Dynamic Buffer
(Conf)
Downlink 120k
Broadcom ASIC 5695 (BCM unit 1)
Total Physical Buffer...............................1024 kb
Total Dedicated Buffer.............................600 kb
Total Dynamic Buffer...............................424 kb
Interface Fixed buffer
(Conf)
1/0/1 100k
1/0/2 120k
!-----------output truncated-------------!
Verify that the configured buffer allocations meet the hardware requirements.
Sets buffer sizes per port and per queue for the ASICs controlling ports 1 – 48
and the stack port on the S50, and ports 1 – 52 and the stack port on the S50V
Set buffer sizes per port and per queue for ASICs controlling the optional
10Gb ports 49 and 50 on the S50 and the 10Gb ports on the S25P.
Display configured values for dedicated buffers, dynamic buffers, and packet
each
limits for port in an S50, S50V, or S25P, as well as the actual settings
from the switch hardware.
Display configured and actual static buffer allocation and packet allocation
selected
values per queue for the
Dynamic Buffer
(Actual)
128k
Fixed Buffer Over-sub
(Actual) (Conf)
100k 10
95k 12
port in an S50, S50V, or S25P.
Pkt Limit Pkt Limit
(Conf) (Actual)
2030 2047
Over-sub Pkt limit
(Actual) (Conf)
8 2047
8 2030
Pkt limit
(Actual)
2047
2030