Copy (Clibanner) - Dell Force10 S2410-01-10GE-24P Command Reference Manual

The following command copies the running config from the switch system memory to flash memory,
overwriting the startup configuration file:
Example Figure 6-35. Using the copy command to Upload the Event Log
Force10 S50 #copy nvram:errorlog tftp://10.10.10.10/errorLog
Mode........................................... TFTP
Set TFTP Server IP............................. 10.10.10.10
TFTP Path......................................
TFTP Filename.................................. errorLog
Data Type...................................... Error Log
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.
Related

copy (clibanner)

Commands
boot system
write
copy (clibanner)
This version of the copy command, with the "clibanner" option, downloads the CLI banner text file to
the switch. Local URLs can be specified using tftp or xmodem. The CLI banner is configurable text
that you can have displayed when the CLI user logs in to the switch. The file cannot be created on the
switch. Instead, create the banner file using a text editor, put it on your TFTP server, and then
download it to the switch.
copy tftp:// tftp_server_ip_address/filepath nvram:clibanner
Syntax
Reversing the sequence of the command parameters uploads the text file from the switch:
copy nvram:clibanner tftp:// tftp_server_ip_address/filepath
The no clibanner command removes the CLI banner.
Parameters tftp_server_ip_address
filepath
Default none
Mode Privileged Exec
copy system:running-config nvram:startup-config
Note:
Starting with SFTOS version 2.3, this command creates a text-based startup-config file
instead of a binary file.
Downloads the CLI banner text file to the switch.
Select an image to be the active image for subsequent reboots and to be loaded by
the boot loader.
Saves the running configuration to NVRAM, duplicating the functionality of
copy system:running-config nvram:startup-config
Enter the URL of the TFTP server in IP address format: xxx.xxx.xxx.xxx
Enter the path on the TFTP server and the filename in this format:
path/filename. If the file resides in the root directory, then you can simply
enter the filename. The path and filename can be no more than 31 characters
each. The file size cannot be larger than 2K.
System Configuration Commands | 109