Dell Force10 S2410-01-10GE-24P Command Reference Manual page 224

Example 2
Report Fields
Related
Commands
stack
Syntax
Mode
Related
Commands
| Stacking Commands
224
Switch Model ID—This field displays the model identifier for the supported switch type.
Management Pref—This field indicates the administrative management preference value assigned to
the switch. This preference value indicates how likely the switch is to be chosen as the management
unit.
Code Type—This field displays the code load target identifier of the switch type.
Figure 12-81. Sample Output from the show supported switchtype Command
Force10-S50 #show supported switchtype 1
Switch Type....................... 0x56950201
Model Identifier.................. SA-01-GE-48T
Switch Description................ Force10 48 port Gigabit S50
Management Preference............. 1
Expected Code Type................ 0x100b000
Supported Cards:
Slot........................... 0
Card Index (CID)............... 2
Model Identifier............... SA-01-10GE-2P
When the variable is entered, the report fields are as follows:
switchindex
Switch Type—This field displays the 32-bit numeric switch type for the supported switch.
Model Identifier—This field displays the model identifier for the supported switch type.
Switch Description—This field displays the description for the supported switch type.
Management Preference—Priority of the switch in management sequence
Expected Code Type—This field indicates the expected code type
Supported Cards—Slot, Card Index (CID), Model Identifier
show supported cardtype
This command enables the user to enter Stacking Config mode—
stack
Global Config
copy Download files to the switch, upload files from the switch, or copy SFTOS images from
the management unit to other members of its stack.
member Configure a switch as a member of the stack.
movemanagement Moves the management unit functionality from one switch to another
Displays information about all card types (expansion modules)
supported in the system
"(config-stack)#"
.