Example
Figure 22-133. Example of show ip irdp Command Output
Force10 #show ip irdp 1/0/1
Interface
---------
1/0/1
Force10#
Virtual LAN Routing Commands
This section contains the Virtual LAN Routing (VLAN Routing) commands:
•
•
•
ip address (VLAN)
This command assigns an IP address and subnet mask to the selected VLAN to support Layer 3
routing.
ip address ip_address subnet_mask
Syntax
The
Mode
Interface VLAN
Command
Version 2.3
History
Related
interface vlan
Commands
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
show ip vlan
Syntax
Mode
Privileged Exec and User Exec
MAC Address used by Routing VLANs—Is the MAC Address associated with the internal bridge-router
Report Fields
interface (IBRI). The same MAC Address is used by all VLAN routing interfaces. It will be displayed
above the per-VLAN information.
Ad Mode
Advertise Address
-------
-----------------
Disable
224.0.0.1
ip address (VLAN) on page 413
show ip vlan on page 413
vlan routing on page 414
no
version of this command deletes routing on the selected VLAN.
Introduced. Replaces
Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
Max Int
Min Int
-------
-------
600
450
vlan routing
.
Hold Time
Preference
--------
-----------
1800
0
Routing Commands | 413