Dell Force10 S2410-01-10GE-24P Command Reference Manual page 238

netbios-name-server
Syntax
Default
Mode
netbios-node-type
Syntax
Default
Mode
next-server
Syntax
| DHCP Server Commands
238
This command configures Windows Internet Naming Service (WINS) name servers that are available
to DHCP clients. WINS name servers map NetBIOS names to IP addresses on TCP/IP networks.
[no] netbios-name-server
One IP address is required, although one can specify up to eight addresses in one command line.
Servers are listed in order of preference (
most preferred server, and so on).
none
DHCP Pool Config
The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol
(DHCP) clients.
The no version of this command removes the NetBIOS node type.
netbios-node-typer
type
The type variable specifies the NetBIOS node type. Valid types are:
• b-node—Broadcast
• p-node—Peer-to-peer
• m-node—Mixed
• h-node—Hybrid (recommended)
none
DHCP Pool Config
This command configures the next server in the boot process of a DHCP client.
Address is the IP address of the next server in the boot process, which is typically a Trivial File
Transfer Protocol (TFTP) server.
The no version of this command removes the boot server list.
next-server
address
no next-server
[ ...
address address2 address8
address1 is the most preferred server,
]
address2 is the next