Dell Force10 S2410-01-10GE-24P Command Reference Manual page 185

port-security max-dynamic
This command sets the maximum of dynamically locked MAC addresses allowed on a selected
interface.
port-security max-dynamic maxvalue
Syntax
The
MAC addresses allowed on a selected interface to its default value.
The
Default 600
Mode
Interface Config; Interface Port Channel Config; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related interface range
Commands
port-security max-static
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a selected
interface.
port-security max-static maxvalue
Syntax
Use the
MAC addresses allowed on a selected interface to its default value.
The
Default 20
Mode Interface Config; Interface Port Channel Config; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related
interface range
Commands
no port-security max-dynamic
range is from 0 to 600.
maxvalue
no port-security max-static
range is from 0 to 20.
maxvalue
command resets the maximum of dynamically locked
Modified: Added Interface Port Channel Config mode.
Added Interface Range mode.
Define an interface range and access the Interface Range mode.
Set the maximum number of statically locked MAC addresses allowed on a
selected interface.
command to reset the maximum of statically locked
Modified: Added Interface Port Channel Config mode.
Added Interface Range mode
Defines an interface range and accesses the Interface Range mode
Security Commands | 185