Audience; How To Use This Guide; Related Documents And Sources Of Additional Information - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Audience

How to Use this Guide

Related Documents and Sources of Additional Information

| About This Guide
10
This guide assumes you are knowledgeable in Layer 2 and Layer 3 networking technologies, that you
have an understanding of the SFTOS software base and have read the appropriate specification for the
relevant switch platform.
This document is primarily for system administrators configuring and operating a system using SFTOS
software. It is intended to provide an understanding of the configuration options of SFTOS software.
In addition, software engineers who will be integrating SFTOS software into their router or switch
product can benefit from a description of the configuration options.
This guide is structured so that you can look up not only command syntax, but also how commands are
related. Related commands are generally grouped together, and, in addition, some command statements
contain links to descriptions of related commands.
While you can infer a lot about the use of a command from its syntax statement, you are better served
to see if the SFTOS Configuration Guide uses the command, because you can learn more about the
context of its use.
Regarding RFCs and MIBs (management information base files) supported in S-Series systems, syntax
statements in this guide and related instructions in the SFTOS Configuration Guide cite the relevant
RFCs. Also, an appendix in that guide contains a list of the RFCs and MIBs.
This guide is structured in this sequence:
• New Features on page 3
• Chapter 2, SFTOS Overview
• Chapter 3, Quick Start
software.
• Information on how this guide presents the CLI modes, syntax, conventions, and terminology is in
Chapter 4, "Using the Command Line Interface," on page
• The CLI command syntax statements begin in
Chapters 6 through 11 describe commands that manage the system, while the later chapters
describe commands specific to particular networking protocols. Beginning with Release 2.3, the
CLI syntax statements that are new or changed include a Command History table.
The following documents provide information on using Dell Force10 S-Series switches and
SFTOS software. All of the documents are available on the Documents tab of iSupport (the
Dell Force10 support website): http://www.force10networks.com/support:
•SFTOS Command Reference
•SFTOS Configuration Guide
•SFTOS and S-Series Release Notes
is a quick way to access new and changed commands.
briefly introduce the S-Series hardware and SFTOS software.
is an introduction to how to start and configure the S-Series using SFTOS
Chapter 5, System Management
23.
Commands.