Ip Pimdm Mode; Ip Pimdm Query-Interval; Show Ip Pimdm - Dell Force10 S2410-01-10GE-24P Command Reference Manual

ip pimdm mode

Syntax
Default
Mode
Command
History
Related
Commands

ip pimdm query-interval

Syntax
Default
Mode
Command
History
Related
Commands

show ip pimdm

| PIM Commands
486
This command sets administrative mode of PIM-DM on an interface to enabled.
[no] aduda,.,u,e.E unit/slot/port
The no version of this command sets administrative mode of PIM-DM on an interface to disabled.
disabled
Interface Config or Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.5.2
Version 2.5.1
Version 2.3
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a VLAN or selects an existing one and enters the Interface VLAN mode.
This command configures the transmission frequency of hello messages between PIM enabled
neighbors. This field has a range of 10 to 3600 seconds.
ip pimdm query-interval seconds
no ip pimdm query-interval
The no version of this command resets the transmission frequency of hello messages between PIM
enabled neighbors to the default value.
30
Interface Config or Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.5.2
Version 2.5.1
Version 2.3
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a VLAN or selects an existing one and enters the Interface VLAN mode.
This command displays the system-wide information for PIM-DM.
Unsupported: not tested in 2.5.2
Unsupported: not tested in 2.5.1
Added Interface Range and Interface VLAN modes.
Unsupported: not tested in 2.5.2
Unsupported: not tested in 2.5.1
Added Interface Range and Interface VLAN modes.