Dell Force10 S2410-01-10GE-24P Command Reference Manual page 291

cos-queue random-detect
This command activates weighted random early discard (WRED) for each specified queue on the
interface. Specific WRED parameters are configured using the 'random-detect queue-parms' and the
'random-detect exponential-weighting-constant' commands.
The no version of this command disables WRED, thereby restoring the default tail drop operation for
the specified queues on the interface.
[no] cos-queue random-detect <queue-id-1> [<queue-id-2> ... <queue-id-n>]
Syntax
Modes Global Config and Interface Config
cos-queue strict
See
deleteport (interface config)
This command deletes the selected port from the specified logical interface (port-channel (LAG) or
VLAN) or, in Interface Range mode, from the selected range of interfaces.
Mode Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as
(conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related
channel-member
Commands
clear port-channel
interface range
interface port-channel
show interfaces port-channel
deleteport (global config)
This command deletes a specific port channel (LAG) or all port channels.
Mode
Global Config
Command
Version 2.5.1
History
Version 2.3
cos-queue strict on page 331 in the QoS chapter.
Deprecated. Removed from CLI
Interface Range mode added
/deletes
Adds the specified range of ports to the LAG selected by the
interface port-channel
command.
Removes all port-channels (LAGs).
Defines an interface range and accesses the Interface Range mode
Creates the port channel (LAG) and invokes the Interface Port Channel
Config mode. Or, if the port channel is already created, simply invokes the
Interface Port Channel Config mode.
Displays an overview of all port channels (LAGs) on the switch or details on
the selected LAG.
Deprecated. Removed from CLI
Interface Range mode added
LAG/Port Channel Commands | 291