Ip Pimsm; Ip Pimsm Mode - Dell Force10 S2410-01-10GE-24P Command Reference Manual

ip pimsm message-interval 10-3600
Syntax
The join/prune interval is specified in seconds. This parameter can be configured to a value from 10 to
3600.
The no ip pimsm message-interval command resets the global join/prune interval for PIM-SM
router to the default value.
Default
60
Mode Global Config

ip pimsm

This command sets administrative mode of PIM-SM multicast routing across the router to enabled.
IGMP must be enabled before PIM-SM can be enabled.
[no] ip pimsm
Syntax
The no version of this command sets administrative mode of PIM-SM multicast routing across the
router to disabled. IGMP must be enabled before PIM-SM can be enabled.
Default
disabled
Mode
Global Config

ip pimsm mode

This command sets administrative mode of PIM-SM multicast routing on a routing interface to
enabled.
[no] ip pimsm mode
Syntax
The no version of this command sets administrative mode of PIM-SM multicast routing on a routing
interface to disabled.
Default
disabled
Mode
Interface Config or Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.3
History
Related interface range
Commands
interface vlan
Added Interface Range and Interface VLAN modes.
Defines an interface range and accesses the Interface Range mode
Creates a VLAN or selects an existing one and enters the Interface VLAN mode.
PIM Commands | 491