Ip Vrrp Authentication - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Default enabled
Mode Global Config
ip vrrp <vrID>
This command sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options, detailed below, to designate the configured virtual router IP
address, set the mode, and set authentication.
[no] ip vrrp vrID
Syntax
The vrID parameter is the virtual router ID; it is an integer value with a range from 1 to 255. Pressing
Enter without including a value for ipaddress creates the VRID on the interface.
The no version of this command removes all VRRP configuration details of the virtual router
configured on a specific interface.
Default
none
Mode Interface Config or Interface VLAN
Command
Version 2.3
History
Related
interface vlan
Commands
ip vrrp
authentication
ip vrrp ip
ip vrrp mode
ip vrrp preempt
ip vrrp priority
ip vrrp timers
advertise

ip vrrp authentication

This command sets the authorization details value for the virtual router configured on a specified
interface.
[no] ip vrrp vrID authentication {none | simple [ key ]}
Syntax
The parameter vrID is the virtual router ID, which has an integer value that ranges from 1 to 255.
The parameter {none | simple} specifies the authorization type for virtual router configured on the
specified interface. The key is optional, only required when the authorization type is simple (text
password).
Modified. Added Interface VLAN mode.
Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN
Sets the authorization details value for the virtual router configured on a specified interface
Sets the IP address value for a virtual router
Enables the virtual router configured on the specified interface. Enabling the status field
starts a virtual router.
Sets the preemption mode value for the virtual router configured on a specified interface
Sets the priority value for the virtual router configured on a specified interface
Sets the advertisement value for a virtual router
Routing Commands | 415