Dell Force10 S2410-01-10GE-24P Command Reference Manual page 256

Example
Field
Descriptions
| GARP Commands
256
Figure 15-90. Example of show gvrp configuration Command
(Force10_S50) #show gvrp configuration 1/0/1
Join
Interface Timer
(centisecs)
----------- -----------
1/0/1 20
Force10-S50 #show gvrp configuration all
Join
Interface Timer
(centisecs)
----------- -----------
1/0/1 20
1/0/2 20
1/0/3 20
1/0/4 20
1/0/5 20
1/0/6 20
1/0/7 20
1/0/8 20
1/0/9 20
1/0/10 20
!----------output truncated---------!
Interface—Valid unit, slot and port number separated by forward slashes.
Join Timer—Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes are a VLAN or multicast group. There is
an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 10 to 100
centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest
granularity of specification is 1 centisecond (0.01 seconds).
Leave Timer—Specifies the period of time to wait after receiving an unregister request for an attribute
before deleting the attribute. Current attributes are a VLAN or multicast group. This may be considered
a buffer time for another station to assert registration for the same attribute in order to maintain
uninterrupted service. There is an instance of this timer on a per-Port, per-GARP participant basis.
Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60
centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
LeaveAll Timer—This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll
PDU indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to
maintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis. The
Leave All Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime.
Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000
centiseconds (10 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
Port GMRP Mode—Indicates the GMRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The
factory default is disabled.
Port GVRP Mode—Indicates the GVRP administrative mode for the port. It may be enabled or disabled.
If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory
default is disabled.
Leave LeaveAll
Timer Timer
(centisecs) (centisecs)
----------- -----------
60 1000
Leave LeaveAll
Timer Timer
(centisecs) (centisecs)
----------- -----------
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
60 1000
Port
GVRP Mode
-----------
Disabled
Port
GVRP Mode
-----------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled