System Configuration Commands - Dell Force10 S2410-01-10GE-24P Command Reference Manual

System Configuration Commands

This chapter provides a detailed explanation of the system configuration commands in the following
major sections:
System Configuration Commands
This section describes the following system configuration commands:
• System Configuration Commands on page 87
• System Utility Commands on page 105
• PoE Commands on page 114
• Dual Image Management Commands on page 119
• Configuration Scripting on page 122
Note:
See also Chapter 5, "System Management Commands," on page 35
"System Logs," on page
For VLAN commands, see the chapter
For port channel (LAG) commands, see the chapter
on page 287.
For port security commands, also known as port MAC locking, see the section
Security Commands on page 183
• auto-negotiate on page 88
• auto-negotiate all on page 89
• bridge aging-time on page 89
• configure on page 90
• enable on page 90
• interface on page 91
• interface range on page 91
• interface loopback on page 95
• monitor session on page 95
• monitor session 1 mode on page 96
• mtu (port) on page 97
• no monitor on page 97
• no monitor session 1 on page 98
169.
LAG/Port Channel Commands on page
in the chapter Security Commands on page 183
and Chapter 9,
LAG/Port Channel Commands
System Configuration Commands | 87
6
287.
Port