Show Port-Channel; Show Port-Channel Brief - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Example 2
Related
Commands

show port-channel

Syntax
Mode
Command
History

show port-channel brief

| LAG/Port Channel Commands
304
Figure 18-110. Example of Output from show interface port-channel Command
Force10#show interface port-channel 1
Description.................................... wills_po20-21-22
MAC Address.................................... 00:01:E8:D5:A0:81
MTU............................................ 1518
Packets RX and TX 64 Octets.................... 0
Packets RX and TX 65-127 Octets................ 0
Packets RX and TX 128-255 Octets............... 0
Packets RX and TX 256-511 Octets............... 0
Packets RX and TX 512-1023 Octets.............. 0
Packets RX and TX 1024-1518 Octets............. 0
Packets RX and TX 1519-1522 Octets............. 0
Packets RX and TX 1523-2047 Octets............. 0
Packets RX and TX 2048-4095 Octets............. 0
Packets RX and TX 4096-9216 Octets............. 0
Jabbers Received............................... 0
Fragments Received............................. 0
Undersize Received............................. 0
Alignment Errors............................... 0
FCS Errors..................................... 0
Overruns....................................... 0
Unicast Packets Received....................... 0
--More-- or (q)uit
Multicast Packets Received..................... 0
Broadcast Packets Received..................... 0
Single Collision Frames........................ 0
Multiple Collision Frames...................... 0
Excessive Collision Frames..................... 0
Port Membership Discards....................... 0
Time Since Counters Last Cleared............... 0 day 0 hr 46 min 38 sec
Link
Adm. Trap
LAG Link Mode Mode
--- ------ ---- ---- ------ ------- ------ -------- ------
1 Down En. En. Dis.
interface range Defines an interface range and accesses the Interface Range mode
interface port-channel Defines a port channel and invokes the Interface Port Channel Config mode
This command displays an overview of all port channels (LAGs) on the switch.
show port-channel {logical_unit/slot/port | all}
Privileged Exec
Version 2.5.1 Modified to
This command displays the static capability of all port channels (LAGs) on the device as well as a
summary of individual port channels.
STP Mbr Port
Mode Type Ports Speed
Static 1/0/20 Auto
1/0/21 Auto
1/0/22 Auto
show interfaces port-channel.
Port
Active
False
False
False