Show Logging Hosts; Show Logging Traplogs - Dell Force10 S2410-01-10GE-24P Command Reference Manual

show logging hosts

This command displays configured logging hosts.
show logging hosts unit
Syntax
The unit variable is the host index
Mode Privileged Exec
Example Figure 9-64. Using the show logging hosts Command
Force10 #show logging hosts ?
<unit> Enter switch ID in the range of 1 to 8.
Force10 #show logging hosts 1 ?
<cr> Press Enter to execute command.
Force10 #show logging hosts 1
Index IP Address
----- --------------
1
Index—An integer from 1 to 8, used for identifying the desired syslog host
Report Fields
IP Address—IP Address of the configured syslog host
Severity—The minimum severity to log to the specified address
Port—Server Port Number. This is the port on the local host from which syslog messages are sent.
Status—The state of logging to configured syslog hosts. If the status is Active, logging occurs; if Disable,
no logging occurs.
Related
logging history
Commands

show logging traplogs

This command displays the SNMP trap summary (number of traps since last reset and last view) and
trap details.
show logging traplogs
Syntax
Mode Privileged Exec
Command
Version 2.3
History
Severity
--------
192.168.77.151 critical
Set the amount of information to be logged to the syslog.
Modified: Replaces the
displaying the message log maintained by the switch, including system trace information.
Port Status
----- ------
514 Active
show msglog
command with the use of the keyword
traplogs
,
System Logs | 177