Dell Force10 S2410-01-10GE-24P Command Reference Manual page 277

Interface
Mode
indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related
igmp enable (interface)
Commands
interface range
interface
show igmpsnooping
igmp mcrtexpiretime (interface)
This command sets the Multicast Router Present Expiration time on a selected interface.
igmp mcrtexpiretime 0-3600
Syntax
The variable is the amount of time in seconds that a switch will wait for a query to be received on an
interface before the interface is removed from the list of interfaces with multicast routers attached. The
range is 0 to 3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.
The no igmp mcrtexpiretime com
interface to 0. A value of 0 indicates an infinite timeout, i.e. no expiration.
Default 0
Mode Interface
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related
igmp enable (interface)
Commands
interface range
show igmpsnooping
igmp mrouter
This command configures the VLAN ID (vlanId) that has the multicast router mode enabled.
[no] igmp mrouter vlanId
Syntax
The no version of this com
Config;Interface Port Channel Config; Interface Vlan Config; Interface Range, which is
Modified: Added Interface Port Channel Config mode.
Modified: Revised from
Vlan Config modes.
Enables IGMP Snooping on a selected interface.
Defines an interface range and accesses the Interface Range mode
Identifies an interface and enters the Interface Config mode.
Displays IGMP Snooping status information.
mand
Config; Interface Port Channel Config; Interface Range, which is indicated by the
Modified: Added Interface Port Channel Config mode.
Modified: Revised from
Interface VLAN Config mode.
Enables IGMP Snooping on a selected interface.
Defines an interface range and accesses the Interface Range mode
Displays IGMP Snooping status information.
mand
disables multicast router mode for a particular VLAN ID (vlanId).
set igmp maxresponse.
sets the Multicast Router Present Expiration time on the
set igmp mcrtexpiretime.
Added Interface Range and Interface
Added Interface Range mode and
IGMP Snooping Commands | 277