Protected-Port (Pvlan) Commands; Vlan Tagging; Vlan Untagging - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Mode Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as
(conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related
untagged
Commands

vlan tagging

This command sets tagging to enabled for the selected interface in a specified VLAN.
Mode Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as
(conf-if-range-vlan 10-20)#.
Command
Version 2.5.1
History
Version 2.3
Related
tagged
Commands
untagged

vlan untagging

This command sets tagging to disabled for the selected interface in a specified VLAN.
Mode Interface Config
Command
Version 2.5.1
History
Version 2.3
Related
untagged
Commands

Protected-Port (PVLAN) Commands

The commands in this section are:
•
•
•
•
Removed from CLI
Deprecated
Adds a Layer 2 interface to the selected VLAN as an untagged interface.
Removed from CLI
Deprecated
Sets tagging to enabled for a specified interface in the selected VLAN.
Adds a Layer 2 interface to the selected VLAN as an untagged interface.
Removed from CLI
Deprecated.
Adds a Layer 2 interface to the selected VLAN as an untagged interface.
show interfaces switchport on page 148
show switchport protected on page 148
switchport protected (Global Config) on page 149
switchport protected (Interface Config) on page 150
VLAN Commands | 147