Dell Force10 S2410-01-10GE-24P Command Reference Manual page 51

Example 1 Figure 5-12. Example of show interface ethernet switchport Output
(Force10) #show interface ethernet switchport
Total Packets Received (Octets)................ 40648140
Unicast Packets Received....................... 324
Multicast Packets Received..................... 307772
Broadcast Packets Received..................... 3
Receive Packets Discarded...................... 0
Octets Transmitted............................. 42855160
Packets Transmitted Without Errors............. 319879
Unicast Packets Transmitted.................... 327
Multicast Packets Transmitted.................. 307916
Broadcast Packets Transmitted.................. 11636
Transmit Packets Discarded..................... 0
Most Address Entries Ever Used................. 5
Address Entries Currently in Use............... 2
Maximum VLAN Entries........................... 1024
Most VLAN Entries Ever Used.................... 2
Static VLAN Entries............................ 2
Dynamic VLAN Entries........................... 0
VLAN Deletes................................... 0
Time Since Counters Last Cleared............... 2 day 16 hr 9 min 26 sec
The display fields of show interface ethernet, when the keyword switchport is added, are as
follows:
Table 5-7. Fields in Output of show interface ethernet switchport Command
Field
Total Packets Received (Octets)
Unicast Packets Received
Multicast Packets Received
Broadcast Packets Received
Receive Packets Discarded
Octets Transmitted
Packets Transmitted without Errors
Unicast Packets Transmitted
Multicast Packets Transmitted
Broadcast Packets Transmitted
Description
The total number of octets of data received by the processor
(excluding framing bits but including FCS octets).
The number of subnetwork-unicast packets delivered to a
higher-layer protocol
The total number of packets received that were directed to a
multicast address. Note that this number does not include packets
directed to the broadcast address.
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent their
being deliverable to a higher-layer protocol. A possible reason for
discarding a packet could be to free up buffer space.
The total number of octets transmitted out of the interface,
including framing characters
The total number of packets transmitted out of the interface
The total number of packets that higher-level protocols requested
be transmitted to a subnetwork-unicast address, including those
that were discarded or not sent
The total number of packets that higher-level protocols requested
be transmitted to a Multicast address, including those that were
discarded or not sent
The total number of packets that higher-level protocols requested
be transmitted to the Broadcast address, including those that were
discarded or not sent
System Management Commands | 51