Dell Force10 S2410-01-10GE-24P Command Reference Manual page 182

Syntax
Mode
users snmpv3 encryption
Default
Syntax
Mode
| User Account Commands
182
users snmpv3 authentication username [none | md5 | sha]
users snmpv3 authentication username
Global Config
This command specifies the encryption protocol to be used for the specified login user. The valid
encryption protocols are des or none
If des is specified, the required key may be specified on the command line. The key may be up to 16
characters long. If the des protocol is specified but a key is not provided, the user will be prompted for
the key. When using the des protocol, the user login password is also used as the snmpv3 encryption
password and therefore must be at least eight characters in length.
If none is specified, a key must not be provided. The username is the login user name associated
with the specified encryption.
no
The version of this command sets the encryption protocol to
login user name for which the specified encryption protocol will be used.
no encryption
[no] users snmpv3 encryption username none | des [key]
Global Config
.
none
. The username is the