Show Classofservice Ip-Dscp-Mapping - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Mode
Example
Related
Commands

show classofservice ip-dscp-mapping

Syntax
Mode
Example
| Quality of Service (QoS) Commands
332
Privileged Exec
Figure 20-113. Example of show classofservice dot1p-mapping Command
Force10 #show classofservice dot1p-mapping 1/0/1
User Priority Traffic Class
------------- -------------
0
1
2
3
4
5
6
7
The following information is repeated for each user priority.
User Priority—The 802.1p user priority value
Traffic Class—The traffic class internal queue identifier to which the user priority value is mapped
classofservice Maps an 802.1p priority to an internal traffic class
dot1p-mapping
interface range Defines an interface range and accesses the Interface Range mode
This command displays the current Differentiated Services Code Point (DSCP) mapping to internal
traffic classes for the global configuration settings.
show classofservice ip-dscp-mapping [unit/slot/port]
The unit/slot/port parameter is optional. If specified, the IP Precedence mapping table of the interface
is displayed. If omitted, the most recent global configuration settings are displayed.
Privileged Exec
Figure 20-114. Example of show classofservice ip-dscp-mapping Command
Force10 #show classofservice ip-dscp-mapping 1/0/1
IP DSCP Traffic Class
------------- -------------
0(be/cs0)
1
2
3
4
5
6
7
8(cs1)
!---output truncated ---------!
The following information is repeated for each user priority:
IP DSCP—The IP DSCP value
1
0
0
1
2
2
3
3
1
1
1
1
1
1
1
1
0