Mode-Based Command Hierarchy; Router Rip Command - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Table 4-2. Command Modes
Command Mode Mode Access Method
Interface VLAN In the Global Config mode,
enter the command
vlan vlanid
Line Config Mode In the Global Config mode,
enter the
command
Mac Access List In the Global Config mode,
Config
enter the
extended
Interface In the Global Config mode,
ManagementEthernet
enter the
managementethernet
command
Policy Map In the Global Config mode,
enter the
command
Policy Class In the Policy Map mode enter
class
the
Router OSPF Config In the Global Config mode,
enter the
command
Router RIP Config In the Global Config mode,
enter the
Bwprovisioning - From the Bwprovisioning
bwallocation Config mode, enter the
bwallocation
Mode
Stacking Config In the Global Config mode,
enter the
TACACS Config In the Global Config mode,
enter the
host ip-address

Mode-based Command Hierarchy

As introduced above, the CLI is divided into various modes. Commands in a particular mode are not
available until the operator switches to that mode, with the exception of the User Exec mode
commands. The User Exec mode commands may also be executed in the Privileged Exec mode.
Prompt
hostname (conf-if-vl-vlan-id) #
interface
.
hostname (line) #
lineconfig
hostname (Mac-Access-List
mac access-list
Config)#
command
hostname (Config-if-ma)#
interface
hostname (Config-policy-map)#
policy-map
hostname
(Config-policy-classmap)#
command
hostname (Config-router)#
router ospf
hostname (Config-router)#
router rip
command
Switch
(Config-bwp-bwallocati
command. on)#
hostname (Config-stack)#
stack
command.
hostname (Tacacs)#
tacacs-server
command.
Exit or Access Previous Mode
To exit to the Global Config mode, enter the
exit
command, or press Ctrl-Z to switch to
the User Exec mode.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Policy Map mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Bwprovisioning mode, enter
exit. To return to the User Exec mode, enter
ctrl-Z.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit
command. To return to the User Exec
mode, enter Ctrl-Z.
Using the Command Line Interface | 31