Interface Vlan - Dell Force10 S2410-01-10GE-24P Command Reference Manual

interface vlan

This command creates a new VLAN if the identified VLAN ID does not already exist, or else the
command selects the existing VLAN. Then, in either case, the command invokes the Interface VLAN
mode, in which you have access to VLAN configuration commands for the specified VLAN.
interface vlan vlanid
Syntax
The vlanid is a valid VLAN identification number (ID 1 is reserved for the default VLAN). VLAN
range is 2-3965.
The no version of this command deletes an existing VLAN.
Default
None
Mode Global Config
Command
Version 2.3
History
Usage
After using this command to access the Interface VLAN mode (the prompt for the Interface VLAN
Information
mode is
You can also make configuration changes to a VLAN in the Interface Range mode (see
on page
Line Interface," on page
Example Figure 7-41. Command Options in the Interface VLAN Mode
Force10 #config
Force10 (Config)#interface vlan 5
Force10 (Conf-if-vl-5)#?
description
encapsulation
exit
help
igmp
ip
mtu
protocol
makestatic
name
pvid
tagged
untagged
Force10 (Conf-if-vl-5)#exit
Force10 (Config)#exit
Force10 #show vlan brief
VLAN ID VLAN Name
------- -------------------------------- -------------
1
5
Force10#
Related
dot1p-priority
Commands
interface
Introduced. Replaces
(conf-if-vl-<vlan-id>)#
91) and the Global Config mode. For details on modes, see
23.
Add Description to the interface
Configure interface link layer encapsulation type.
To exit from the mode.
Display help for various special keys.
Configure IGMP Snooping parameters for the Vlan
Configure IP parameters.
Sets the default MTU size.
Configure the Protocols associated with particular
Group Ids.
Change the VLAN type from 'Dynamic' to 'Static'.
Configure an optional VLAN Name.
Configure the VLAN id for a specific port.
Configure tagging for a specific VLAN port.
Configure untagging for a specific VLAN port.
Default
Configures the 802.1p port priority assigned for untagged packets for a specific
interface.
Accesses the Interface Config mode for a designated logical or physical interface.
vlan database and
) , you can configure the selected VLAN.
MAC Aging
300
300
vlan
commands.
interface range
Chapter 4, "Using the Command
IP Address
--------------------
unassigned
unassigned
VLAN Commands | 129