Dell Force10 S2410-01-10GE-24P Command Reference Manual page 321

show spanning-tree
This command displays spanning tree settings for the common and internal spanning tree, when the
optional parameter "brief" is not included in the command. The following details are displayed.
Format
Mode
Bridge Priority
Bridge Identifier
Time Since Topology Change
Topology Change Count
Topology Change
Designated Root
Root Path Cost
Root Port Identifier
Root Port Max Age
Root Port Bridge Forward Delay
Hello Time Configured value
Bridge Hold Time
Bridge Max Hops
CST Regional Root
Regional Root Path Cost
Associated FIDs
Associated VLANs
When the "brief" optional parameter is included, this command displays spanning tree settings for the
bridge. In this case, the following details are displayed.
Bridge Priority
Bridge Identifier
Bridge Max Age
Bridge Max Hops
Bridge Hello Time
Bridge Forward Delay
Bridge Hold Time
show spanning-tree interface
This command displays the settings and parameters for a specific switch port within the common and
internal spanning tree. The <unit/slot/port> is the desired switch port. The following details are
displayed on execution of the command.
show spanning-tree <brief>
Privileged EXEC and User EXEC
Configured value.
in seconds
Number of times changed.
Boolean value of the Topology Change parameter for the switch indicat-
ing if a topology change is in progress on any port assigned to the com-
mon and internal spanning tree.
Value of the Root Path Cost parameter for the common and internal span-
ning tree.
Derived value
Derived value
Minimum time between transmission of Configuration Bridge Protocol
Data Units (BPDUs)
Bridge max-hops count for the device.
List of forwarding database identifiers currently associated with this instance.
List of VLAN IDs currently associated with this instance.
Configured value.
TConfigured value.
Bridge max-hops count for the device.
Configured value.
Configured value.
Minimum time between transmission of Configuration
Bridge Protocol Data Units (BPDUs)
Spanning Tree (STP) Commands | 321