Dell Force10 S2410-01-10GE-24P Command Reference Manual page 131

name (VLAN)
This command changes the name of a VLAN.
[no] name newname
Syntax
The newname is an alphanumeric string of up to 32 characters.
The
Default
The name for VLAN ID 1 is always Default. The name for other VLANs is defaulted to a blank string.
Mode Interface VLAN
Command
Version 2.3
History
Related
show vlan
Commands
show port
ip address (VLAN)
network mgmt_vlan
Command
Version 2.5.1
History
Version 2.3
Related
interface managementethernet
Commands
vlan participation (management
VLAN only)
participation (VLAN)
Configure how ports participate in a specific VLAN.
Mode Interface VLAN
Command
Version 2.5.1
History
Version 2.3
Related
tagged
Commands
no
version of this command sets the name of a VLAN to a blank string.
Modified: Changed from
Interface VLAN. Removed ID range variable.
Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
Displays port information for a selected port or for all ports
Create VLAN and enter Interface VLAN mode.
Removed from CLI
Deprecated: The functionality is available in the
the Interface ManagementEthernet mode.
Removed from CLI
Deprecated
Sets tagging to enabled for a specific port (or range of ports) in the selected VLAN.
vlan name name
to and mode changed from VLAN database to
Invokes ManagementEthernet mode (the (Config-if-ma)# prompt), in
which the user can set the network parameters of the switch, including
vlan participation
using the
Assigns the management VLAN.
vlan participation
command within
command.
VLAN Commands | 131