Dell Force10 S2410-01-10GE-24P Command Reference Manual page 320

| Spanning Tree (STP) Commands
320
Default
Format
spanning-tree mst <mstid> {
Mode
no spanning-tree mst
This command sets the Path Cost or Port Priority for this port within the multiple spanning tree
instance or in the common and internal spanning tree to the respective default values. If the <mstid>
parameter corresponds to an existing multiple spanning tree instance, then the configurations are done
for that multiple spanning tree instance. If however 0 (defined as the default CIST ID) is passed as the
<mstid>, then the configurations are performed for the common and internal spanning tree instance.
If the 'cost' token is specified, this command sets the path cost for this port within a multiple spanning
tree instance or the common and internal spanning tree instance, depending on the <mstid> parameter,
to the default value, i.e. a pathcost value based on the Link Speed.
If the 'external-cost' token is specified, this command sets the external path cost for this port for mst
'0' instance, to the default value, i.e. a pathcost value based on the Link Speed.
If the 'port-priority' token is specified, this command sets the priority for this port within a specific
multiple spanning tree instance or the common and internal spanning tree instance, depending on the
<mstid> parameter, to the default value, i.e. 128.
Format
Mode
spanning-tree hello-time
This command sets the Admin Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value being
less than or equal to "(Bridge Max Age / 2) - 1".
Default
Format
Mode
no spanning-tree hello-time
This command sets the admin Hello Time parameter for the common and internal spanning tree to the
default value, i.e. 2.
Format
Mode
cost : auto
external-cost : auto
port-priorty : 128
{cost <1-200000000> | auto } |
{external-cost <1-200000000> | auto }| port-pri-
ority <0-240>}
Interface Config
no spanning-tree mst <mstid> <cost | external-cost
| port-priority>
Interface Config
2
spanning-tree hello-time <1-10>
Interface Config
no spanning-tree hello-time
Interface Config