Ip Http Javamode Enable; Ip Http Secure-Port; Ip Http Secure-Protocol - Dell Force10 S2410-01-10GE-24P Command Reference Manual

•
•

ip http javamode enable

Enable Java mode for the Web User interface (Web UI) to SFTOS.
ip http javamode enable
Syntax
Use no ip http javamode enable to disable Java mode.
Default
disabled
Mode
Global Config
Command
Version 2.5.1
History
Version 2.3

ip http secure-port

This command is used to set the SSLT port.
ip http secure-port portid
Syntax
The no ip http secure-port command resets the SSLT port to the default value.
The portid value can be from 1 to 65535.
Default 443
Mode
Global Config
Command
Version 2.5.1
History
Version 2.3

ip http secure-protocol

This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or
to both TLS1 and SSL3.
ip http secure-protocol [SSL3] [TLS1]
Syntax
Default
SSL3 and TLS1
Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
Show commands are used to display switch settings, statistics and other information.
Unsupported: The
Modified: Moved from Privileged Exec mode to Global Config mode.
Unsupported: The
Modified: Moved from Privileged Exec mode to Global Config mode.
SFTOS
Web UI is not supported in v. 2.5.1 or 2.5.2.
SFTOS
Web UI is not supported in v. 2.5.1 or 2.5.2.
Security Commands | 213