Mtu (Lag) - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Related
interface port-channel
Commands
interface range
mac access-group
mac access-list
extended
show mac access-lists
show ip access-lists
mode dvlan-tunnel
This command is available in the Interface Port Channel Config mode.
See

mtu (LAG)

This command sets the maximum transmission unit (MTU) size (in bytes) for the selected LAG (port
channel).
The no version of this command resets the MTU to the default for the port channel.
mtu 1518-9216
Syntax
For the standard implementation, the range is a valid integer between 1518–9216.
Default
1518
Mode
Interface Port Channel Config
Command
Version 2.5.1
History
Related
mtu (port)
Commands
mtu (VLAN)
ip mtu
port-channel
This command configures a new port channel (LAG) and generates a logical unit/slot/port number for
the port channel.
Command
Version 2.5.1.0
History
Defines a port channel and invokes the Interface Port Channel Config mode
Defines an interface range and accesses the Interface Range mode
In the Global Config, Interface Config, or Interface Range modes, attaches a MAC
ACL to the selected interface.
Creates a MAC Access Control List (ACL) identified by name, consisting of
classification fields defined for the Layer 2 header of an Ethernet frame.
Displays the rules defined for the MAC access list specified by
Displays an IP Access Control List (ACL) and all of the rules that are defined for
the ACL.
mode dvlan-tunnel on page 153
Sets the MTU for a selected interface (Interface Config mode)
Sets the MTU for a selected VLAN (VLAN mode)
Sets the MTU on a routing interface (Interface Config or VLAN mode)
Modified: In 2.5.1, the command syntax is changed to
1-128.
in the VLAN chapter.
Introduced in the new Interface Port Channel Config mode.
name
.
interface port-channel
LAG/Port Channel Commands | 297