Dell Force10 S2410-01-10GE-24P Command Reference Manual page 130

makestatic
Syntax
Mode
Command
History
Related
Commands
mtu (VLAN)
Syntax
Default
Mode
Command
History
Related
Commands
| VLAN Commands
130
interface vlan Groups a set of individual interfaces, a range of interfaces, or more than one range of
interfaces, to which subsequent configuration commands can be applied (bulk
configuration)
ip address (VLAN) Assigns an IP address and subnet mask to the selected VLAN to support Layer 3
routing.
protocol group Attach a group ID to the selected VLAN.
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports
This command changes a dynamically created VLAN (one that is created by GVRP registration) to a
static VLAN (one that is permanently configured and defined).
makestatic
Interface VLAN
Version 2.3
Changed from
mode.
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports
This command sets the MTU (Maximum Transmission Unit) of the selected VLAN.
[no] mtu
576-1500
1500
Interface VLAN
Version 2.3 Introduced
mtu (port) Sets the MTU for a selected port (Interface Config mode)
mtu (LAG) Sets the MTU for a selected port channel
ip mtu Sets the MTU on a routing interface (Interface Config or VLAN mode)
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports
vlan makestatic
vlan-id
to
makestatic
and moved to Interface VLAN