Set Igmp Mcrtexpiretime (Interface); Set Igmp Mcrtexpiretime All - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Default
Mode
Related
Commands

set igmp mcrtexpiretime (interface)

Command
History
Related
Commands

set igmp mcrtexpiretime all

Syntax
Default
Mode
Related
Commands
| IGMP Snooping Commands
282
no set igmp mcrtrexpiretime
0
Global Config
igmp enable (interface)
set igmp mcrtrexpiretime
(global)
show igmpsnooping
Version 2.3
Revised to
igmp enable Enables IGMP Snooping on a selected interface.
(interface)
show igmpsnooping Displays IGMP Snooping status information.
This command sets the Multicast Router Present Expiration time on the system for all the interfaces.
This is the amount of time in seconds that a switch will wait for a query to be received on an interface
before the interface is removed from the list of interfaces with multicast routers attached. The range is
0 to 3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.
The no version of this com
mand
0. A value of 0 indicates an infinite timeout, i.e. no expiration.
set igmp mcrtexpiretime all 0-3600
no set igmp mcrtexpiretime all
0
Global Config
igmp enable Enables IGMP Snooping on a selected interface.
(interface)
show igmpsnooping Displays IGMP Snooping status information.
Enables IGMP Snooping on a selected interface.
Sets the Multicast Router Present Expiration time on the system for all the
interfaces.
Displays IGMP Snooping status information.
igmp mcrtexpiretime.
sets the Multicast Router Present Expiration time on all interfaces to