Show Ip Igmp Interface - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Mode Privileged Exec and User Exec
If detail is not specified for a specified interface, the following fields are displayed:
Report Fields
The following fields are not displayed if the interface is not enabled.
If detail is specified, the following fields are displayed:
Related
ip igmp (global)
Commands
ip igmp (VLAN)
ip igmp-proxy

show ip igmp interface

This command displays the IGMP information for the specified interface.
show ip igmp interface {unit/slot/port | vlan 1-3965 }
Syntax
Designate a port number or a VLAN number.
Mode Privileged Exec and User Exec
IP Address—This displays the IP address of the interface participating in the multicast
group.
Subnet Mask—This displays the subnet mask of the interface participating in the
multicast group.
Interface Mode—This displays whether IGMP is enabled or disabled on this interface.
Querier Status—This displays whether the interface has IGMP in querier mode or
non-querier mode.
Groups—This displays the list of multicast groups that are registered on this interface.
Multicast IP Address—This displays the IP Address of the registered multicast group on
this interface.
Last Reporter—This displays the IP Address of the source of the last membership report
received for the specified multicast group address on this interface.
Up Time—This displays the time elapsed since the entry was created for the specified
multicast group address on this interface.
Expiry Time—This displays the amount of time remaining to remove this entry before it
is aged out.
Version1 Host Timer—This displays the time remaining until the local router will assume
that there are no longer any IGMP version 1 multicast members on the IP subnet attached
to this interface.
Sets the administrative mode of IGMP in the router to active.
Sets the administrative mode of IGMP for the selected VLAN to active
When used without parameters, this command enables/disables the IGMP Proxy on the
router. When used with the
interface status parameters of the IGMP Proxy router. When used with
unsolicit-report-interval
IGMP Proxy router.
reset-status
keyword, this command resets the host
, this command sets the unsolicited report interval for the
IP Multicast Commands | 477