Rmon Collection History - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Example Figure 16-92. RMON configuration Example
Force10# config
Force10 (config)#rmon event 10
Force10 (config)#rmon event 20
Force10 (config)#rmon alarm 50 1.3.6.1.4.1.6027.1.1.16.0.2 absolute
rising-threshold 200 10 falling-threshold 100 20
Related show rmon alarms
Commands
show rmon alarms brief

rmon collection history

Enable the RMON MIB history group of statistics collection on an interface.
rmon collection history controlEntry 1-65535 [buckets number ] [interval 5-3600 ] [owner
Syntax
name
To remove a specified RMON history group of statistics collection, use the no rmon collection
history controlEntry 1-65535 command.
controlEntry 1-65535
Parameters
buckets number
interval 5-3600
owner name
Defaults As described above
Mode
Interface Config
Command
Version 2.5.1.0
History
Related
show rmon history
Commands
show rmon history brief
Display the contents of the RMON Alarm Table for a specific index number.
Display a summary of the contents of the RMON Alarm Table.
]
Introduced
Display the contents of the RMON Ethernet History table for a specific index
number.
Display the contents of RMON Log table for a specific index entry.
controlEntry
Enter the keyword
using a value. Then enter an integer value from 1 to 65535 to uniquely
identify, in the RMON History Table, the RMON group of statistics.
(OPTIONAL) Enter the keyword
for the RMON collection history group of statistics.
Bucket Range: 1 to 1000
Default: 50
(OPTIONAL) Enter the keyword
in each polling cycle.
Range: 5 to 3600 seconds
Default: 1800 seconds
(OPTIONAL) Enter the keyword
record the owner of the RMON group of statistics.
Range: 1–127 alphanumeric characters
to specify the RMON group of statistics
buckets
followed the number of buckets
interval
followed the number of seconds
owner
followed by the owner name to
RMON Commands | 263