Igmp Commands - Dell Force10 S2410-01-10GE-24P Command Reference Manual

IGMP Commands

This section provides a detailed explanation of the Internet Group Management Protocol (IGMP)
commands available in the Layer 3 package.
This section contains the following commands:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
See also the IGMP Snooping commands in
ip igmp (global)
This command enables IGMP on the router.
ip igmp
Syntax
Use no ip igmp to set the administrative mode of IGMP in the router to inactive.
Default
disabled
Mode Global Config
ip igmp (VLAN)
This command sets the administrative mode of IGMP for the selected VLAN to active.
ip igmp
Syntax
Use no ip igmp to set the administrative mode of IGMP for the selected VLAN to inactive.
ip igmp (global) on page 471
ip igmp last-member-query-count on page 472
ip igmp last-member-query-interval on page 472
ip igmp-proxy on page 473
ip igmp query-interval on page 473
ip igmp query-max-resp-time on page 474
ip igmp robustness on page 474
ip igmp startup-query-count on page 474
ip igmp startup-query-interval on page 475
ip igmp version on page 475
show ip igmp on page 476
show ip igmp groups on page 476
show ip igmp interface on page 477
show ip igmp interface membership on page 479
show ip igmp interface stats on page 479
show ip igmp-proxy on page 480
show ip igmp-proxy interface on page 481
show ip igmp-proxy groups on page 482
show ip igmp-proxy groups detail on page 482
IGMP Snooping Commands on page 273.
IP Multicast Commands | 471