Dell Force10 S2410-01-10GE-24P Command Reference Manual page 300

Command
History
Related
Commands
port lacptimeout (global)
Syntax
Parameters
Mode
Related
Commands
port lacptimeout (interface)
Syntax
Parameters
Mode
Command
History
Related
Commands
| LAG/Port Channel Commands
300
Version 2.5
Version 2.3
interface range Defines an interface range and accesses the Interface Range mode
protocol lacp Reenables LACP on a LAG.
protocol static Converts a LAG from LACP to static.
This command sets the Link Aggregation Control Protocol (LACP) timeout on all ports.
The no version of this command removes the Link Aggregation Control Protocol (LACP) timeout on
all ports.
[no] port lacptimeout {short all | long all}
short all short all
Enter
long all long all
Enter
Global Config
port lacptimeout (interface)
This command sets the Link Aggregation Control Protocol (LACP) timeout on the selected port(s).
The no version of this command removes the Link Aggregation Control Protocol (LACP) timeout on
the selected port(s).
[no] port lacptimeout {short | long}
short short
Enter
long long
Enter
Interface Config; Interface Range
Version 2.3
interface
interface range
port lacptimeout (global)
protocol lacp
Deprecated. Use
no port lacpmode all
Revised from [ ]
to select the short timeout setting (3 seconds) for all ports.
to select the long timeout setting (90 seconds) for all ports.
Set the LACP timeout on the selected port(s).
to select the short timeout setting (3 seconds) for the selected ports.
to select the long timeout setting (90 seconds) for the selected ports.
Added Interface Range mode.
Accesses the Interface Config mode for the selected interface.
Defines an interface range and accesses the Interface Range mode
Set the Link Aggregation Control Protocol (LACP) timeout on ports.
protocol static
and .