Dell Force10 S2410-01-10GE-24P Command Reference Manual page 55

Sftos command reference
Hide thumbs Also See for Force10 S2410-01-10GE-24P:
Table of Contents

Advertisement

Table 5-8. Fields in Output of show interface ethernet unit/slot/port Command
Field
Reserved Address Discards
Broadcast Storm Recovery
CFI Discards
Upstream Threshold
Packets Transmitted Octets
Total Packets Transmitted (Octets)
Packets Transmitted 64 Octets
Packets Transmitted 65-127 Octets
Packets Transmitted 128-255 Octets
Packets Transmitted 256-511 Octets
Packets Transmitted 512-1023 Octets
Packets Transmitted 1024-1518 Octets
Packets Transmitted 1519-1522 Octets
Max Frame Size
Packets Transmitted Successfully
Total Packets Transmitted Successfully
Unicast Packets Transmitted
Multicast Packets Transmitted
Description
The number of frames discarded that are destined to an IEEE 802.1
reserved address and are not supported by the system.
The number of frames discarded that are destined for
FF:FF:FF:FF:FF:FF when Broadcast Storm Recovery is enabled
The number of frames discarded that have CFI bit set and the
addresses in RIF are in non-canonical format.
The number of frames discarded due to lack of cell descriptors
available for that packet's priority level.
The total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including FCS
octets). This object can be used as a reasonable estimate of ethernet
utilization. If greater precision is desired, the etherStatsPkts and
etherStatsOctets objects should be sampled before and after a
common interval.
The total number of packets (including bad packets) received that
were 64 octets in length (excluding framing bits but including FCS
octets)
The total number of packets (including bad packets) received that
were between 65 and 127 octets in length inclusive (excluding
framing bits but including FCS octets).
The total number of packets (including bad packets) received that
were between 128 and 255 octets in length inclusive (excluding
framing bits but including FCS octets)
The total number of packets (including bad packets) received that
were between 256 and 511 octets in length inclusive (excluding
framing bits but including FCS octets)
The total number of packets (including bad packets) received that
were between 512 and 1023 octets in length inclusive (excluding
framing bits but including FCS octets)
The total number of packets (including bad packets) received that
were between 1024 and 1518 octets in length inclusive (excluding
framing bits but including FCS octets)
The total number of packets (including bad packets) received that
were between 1519 and 1522 octets in length inclusive (excluding
framing bits but including FCS octets)
The maximum size of the Info (non-MAC) field that this port will
receive or transmit
The number of frames that have been transmitted by this port to its
segment
The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that
were discarded or not sent
The total number of packets that higher-level protocols requested be
transmitted to a Multicast address, including those that were
discarded or not sent
System Management Commands | 55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Force10

Table of Contents