Mac Access-Group (Port Channel) - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Parameters
Default
Mode
Command
History
Related
Commands

mac access-group (port channel)

Syntax
Parameters
Modes
Command
History
| LAG/Port Channel Commands
296
1–199
Enter the number of the ACL, which was assigned using the
1-4294967295
(OPTIONAL)
of this ACL relative to other ACLs already assigned to this LAG. A
lower number indicates higher precedence order. If the number is
already in use for this LAG, this ACL replaces the currently attached
ACL using that sequence number. If you do not specify a number with
this command, a number that is one greater than the highest sequence
number currently in use for this LAG is used for this ACL.
none
Interface Port Channel Config
Version 2.5.1
access-list
interface range
interface port-channel
ip access-group (Interface)
show ip access-lists
This command attaches a specified MAC Access Control List (ACL) identified by
selected port channel in the ingress direction.
mac access-group
name
The no mac access-group
channel.
name
1-4294967295
Interface Port Channel Config
Version 2.5.1
a sequence number that indicates the desired order
Enter
Introduced in the new Interface Port Channel Config mode
Creates an IP access control list
Defines an interface range and accesses the Interface Range mode
Defines a port channel and invokes the Interface Port Channel Config mode
Attaches an ACL to the selected interface (Interface Config or Interface
Range modes)
Displays an IP Access Control List (ACL) and all of the rules that are defined
for the ACL. The accesslistnumber is the number used to identify the ACL
[ 1-4294967295 ]
name command removes the specified MAC ACL from the port
Enter the name assigned by the
(OPTIONAL) is a sequence number that will indicate the
This
order of application of this ACL relative to other ACLs assigned to
this port channel. A lower sequence number indicates higher
precedence order. If the number you select is already in use for this
port channel, this ACL replaces the currently attached ACL using
that sequence number. If you do not specify a number with this
command, a number that is one greater than the highest sequence
number currently in use for this port channel is used for this ACL.
Introduced, along with its Interface Port Channel Config mode
access-list
name
mac access-list extended command.
command.
to the