Show Interface - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Table 5-4. Fields in the Output of the show hardware Command
Field
Switch Description
Vendor ID
Plant ID
Country Code
Date Code
Serial Number
Part Number
Revision
Catalog Number
Burned in MAC Address
Software Version
Additional Packages
Related
show cx4-cable-length
Commands
show tech-support

show interface

This command displays a summary of statistics for a specific port or for the entire switch, depending
on the argument.
show interface {unit/slot/port | ethernet
Syntax
managementethernet | switchport}
Parameters
unit/slot/port
ethernet
unit/slot/port
loopback
managementethernet
switchport
Mode Privileged Exec
Command
Version 2.5.1
History
Description
Text used to identify the product name of this switch
Number used to identify the manufacturer of the device
Month and year of manufacture of the switch
The unique box serial number for this switch
Manufacturing part number
The catalog number of the switch
Universally assigned network address
The version of the SFTOS software currently running on the switch, expressed as
base release.version.revision.
The software modules that are incorporated into this version of SFTOS
Displays CX4 cable lengths connected to the system.
Displays the output of many
,
Enter the port number of a particular port to query, where unit is the stack
member, slot is always 0 (zero), and port is the port number. The display
parameters are shown below.
switchport |
{
See show interface ethernet on page
| }
1-3965
See show interface loopback on page
See show interface managementethernet on page
Enter the keyword to display a summary of statistics on Layer 2 interfaces.
See show interface switchport on page
Modified: Added port channel options and Native VLAN information to VLAN output.
Many report fields changed.
show
commands, including this one.
switchport | unit/slot/port | 1-3965 } | loopback |
{
50.
99.
59.
System Management Commands | 47
57.