Dell Force10 S2410-01-10GE-24P Command Reference Manual page 377

Table 20-25. Fields of show buffer unit Command Output (continued)
Field
Pkt Limit (Conf)
Pkt Limit (Actual)
Command
Version 2.5.1
History
Related
buffer check
Commands
buffer dedicated (1G and
stacking ports)
buffer dynamic (1G and stack
ports)
show buffer unit
Description
The packet limit allocation, as configured
The packet limit allocation, as it is before reboot sets the value to the configured
value
Introduced
Verify that the configured buffer allocations meet the hardware requirements.
Set buffer sizes per port and per queue for ports 1 – 48 and the stack port on
the S50, and ports 1 – 52 and the stack port on the S50V.
Set dynamic buffer sizes per port for ports 1 – 48 and the stack port on the
S50, and ports 1 – 52 and the stack port on the S50V
Display configured values for dedicated buffers, dynamic buffers, and packet
each
limits for port in an S50, S50V, or S25P, as well as the actual settings
from the switch hardware.
Quality of Service (QoS) Commands | 377