Dell Force10 S2410-01-10GE-24P Command Reference Manual page 206

Syntax
Parameters
Default
Mode
Usage
Information
Related
Commands
tacacs-server key
Syntax
Parameters
Default
Command Modes
Usage
Information
| Security Commands
206
tacacs-server host
ip-address
To remove a TACACS+ server host, use the no tacacs-server host {
command.
ip-address Enter the IP address, in dotted decimal format, of the TACACS+ server host.
Not configured
CONFIGURATION
In CONFIGURATION mode, you can set several global values for all TACACS+ servers, as listed
below. Successful use of the tacacs-server host command to identify a particular host puts you into
the TACACS configuration mode for that particular host. In that mode, you can override global and
default settings of those parameters. In that TACACS configuration mode, you can also use the
following commands for the particular TACACS host: key, port, priority, single-connection, and
timeout
authentication login
tacacs-server key
tacacs-server timeout
port
timeout
key
priority
show tacacs
Configure a key for communication between a TACACS+ server and client.
tacacs-server key
key
To delete a key, use the no tacacs-server key
key
Enter a text string, up to 127 characters long, as the clear text password.
Leading spaces are ignored.
Not configured.
CONFIGURATION
The key configured with this command must match the key configured on the TACACS+ daemon.
Specify the login authentication method.
Configure a TACACS+ key for the TACACS server.
Specify a global timeout value for all TACACS+ hosts.
Specify a server port number for a particular TACACS host.
Specify the timeout value for a particular TACACS host.
Specify the authentication and encryption key for all communications between the
client and the particular TACACS server.
Specify the priority value for a particular TACACS server.
Display settings for all or a particular TACACS server.
key
hostname | ip-address }