Clear Ip Dhcp Binding; Clear Ip Dhcp Conflict - Dell Force10 S2410-01-10GE-24P Command Reference Manual

bootfile
Syntax
Default
Mode

clear ip dhcp binding

Syntax
Default
Mode
clear ip dhcp server statistics
Syntax
Mode

clear ip dhcp conflict

Syntax
Default
Mode
| DHCP Server Commands
232
The command specifies the name of the default boot image for a DHCP client. The filename specifies
the boot image file.
The oe version of this command deletes the boot image name.
bootfile
filename
no bootfile
none
DHCP Pool Config
This command deletes an automatic address binding from the DHCP server database. If "*" is
specified, the bindings corresponding to all the addresses are deleted. address is a valid IP address
made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
clear ip dhcp binding {
address
none
Privileged Exec
This command clears DHCP server statistics counters.
clear ip dhcp server statistics
Privileged Exec
The command is used to clear an address conflict from the DHCP Server database. The server detects
conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used as the
address parameter.
clear ip dhcp conflict {
address
none
Privileged Exec
| }
*
| }