Terminal Length; Show Terminal Length - Dell Force10 S2410-01-10GE-24P Command Reference Manual

show terminal length

Syntax
Mode
Command
History
Related
Commands

terminal length

Syntax
Parameters
Defaults
Mode
Command
History
Usage
Information
Related
Commands
| System Configuration Commands
112
This command displays how many lines are currently in one page of "show" command output, as
configured by the terminal length command.
show terminal length
Privileged Exec and User Exec
Version 2.3
terminal length
Configure the number of lines to be displayed on the terminal screen in one page of output of show
commands.
terminal length
number-of-lines
number-of-lines
Enter the number of lines that you want the output to display before pausing. Entering
zero (0) will cause the terminal to display without pausing.
Range: 0|5 to 512 (1-4 cannot be set.)
Default: 24 lines
24 lines
Use Exec or Privileged Exec
Version 2.3
This is a session-based command. The CLI presents 24 lines per page of show command output, as a
default, unless the user uses this command to change the number of lines. At the end of each page, the
user can press q for quit—to stop the output and return to the command line—or any other key to see
the next page of the display.
show terminal length
Introduced
Sets the number of lines displayed on the terminal without pausing.
Introduced
Displays the number of lines set by
terminal length
.