Dell Force10 S2410-01-10GE-24P Command Reference Manual page 39

The value for ipaddr is the IP Address of the management interface.
The value for subnetmask is a 4-digit dotted-decimal number which represents the subnet mask of the
interface.
Enter no ip address to remove the IP Address and subnet mask.
Mode Interface ManagementEthernet — (Config-if-ma)# prompt within the Global Config mode
Command
Version 2.3
History
Related
management route default
Commands
interface managementethernet
ip address (routed)
show interface
mac-address
Configure the MAC address to be used for the management VLAN.
mac-address mac-address
Syntax
Default
None
Mode Interface ManagementEthernet
Command
Version 2.3
History
Related
management route default
Commands
interface managementethernet
mac-type
Configure the MAC address to be used for the management VLAN.
mac-type {local | burnedin}
Syntax
Default None
Mode
Interface ManagementEthernet
Introduced: Replaces the network parms
components of the management address.
Sets the IP gateway of the switch.
Invokes the Interface ManagementEthernet mode.
Configures an IP address on a routed interface.
Displays a summary of statistics for a specific port, including
the management port, or a count of all CPU traffic based upon
the argument.
Introduced. Replaces the network mac-address
Sets the IP gateway of the switch.
Invokes the Interface ManagementEthernet mode, the
(Config-if-ma)# prompt.
command for the IP address and subnet mask
command.
System Management Commands | 39